I-Beam Cable Trolley L-Line Series 0366

I-Beam Festoon Systems

I-Beam Festoon System L-Line Series 0366

High-speed cable trolley with single layer side-loading cable supports for round cables. Suitable for maximum mechanical and dynamic loads including traversing operation with strong lateral forces. Also suitable for short work cycles and high work speeds. For high speeds, in combination with a motorized cable trolley.

Main applications

STS container cranes
Ladle cranes
Heavy-duty grab cranes
High-speed conveyor systems

Specification

Travel speed max.^{1) 2)}: 300 m/min [984.25 ft/min]
Load capacity/trolley max.¹⁾: 350 kg [771.62 lb]
Main rollers diameter: 112/125 mm [4.41" and 4.92"]
Ambient temperature: -30 ... +50 °C [-22° F to 122° F]
Applications: indoor / outdoor / sea climate
I-beam: parallel flange / tapered flange

¹⁾depending on roller size/ roller material
²⁾ together with motorized trolleys

Downloads

Festoon Systems for I-Beams Program 0366 | 0375 | 0380

PDF | 6.05 MB

Language: English

Document type: Brochures

Download

MAL0300-0004-EN Festoon Systems for I-Beams - 0366, 0375

PDF | 5.94 MB

Language: English

Document type: Operation Manuals

Download

WV0300-0052-EN Checklist for Motorized Festoons - Supplement_0365-0380

PDF | 1.4 MB

Language: English

Document type: Service Manuals

Download

FAQ

When is the Cable Trolley L-Line Series 0366 used?

The I-Beam Festoon System L-Line 0366 is typically used in high dynamic applications such as Ship-To-Shore container cranes. Catenary towing trolleys are available for this specific application.

How does an I-Beam System work?

Cable trolleys are installed on an I-beam. The cable package is installed on the cable trolleys in cable loops. The system is moved by a towing trolley, which is fixed to the energy consuming equipment.

How is the energy and data transmitted?

Energy and data are transmitted via flexible flat or round cable packages. Any cable used must be suitable for use in a festoon system. Various types of cable with PUR or rubber insulation are available.

What is the typical track profile?

The system is typically operating on tapered or parallel I-beams. The possible I-beam types have been standardised IPE 240; 250 x125 x 6 x 9; W 8 x 18 ; INP 220; GB 706-65/20a; 200 x 100 x 7 x 10x8°; S8 x 18.4

Are I-Beam Festoon Systems for indoor or outdoor use?

I-Beam Festoon Systems can be used both indoors and outdoors.

What are the typical wear parts?

Typical wear parts are the rollers of the running gears and the buffers on the trolleys. The rubber damping devices used in a system are also subject to wear.